|
|
|
Characteristic:
-
- 6mic+2Stereo input with peak indicator.
- 48V phantomPower.
- Mic channel line input.
- 24Bit DSP,sampling rate 31.25KHz, all effect parameters adjustable.
- Effects drive controlwith clipping indicator & mute function.
- 1×Aux+1×Monitor output.
- Tape in/out.
- 3 band EQ for all channels.
- 7 band graphic EQ for master output .
- 12 led output level display.
- Available built in amplifier: 2×150W/4Ω or 2×300W/4Ω.
-
Parameter Download

PDF documents |
|
Model |
POD62A |
| Mono input |
Channels |
6 |
MIC input |
15mV (Max output) |
Frequency response |
20Hz~20KHz (±2dBu) |
Disortion(THD & N) |
0.03% at 4dbu, 1KHz |
Gain renge |
-45dBu ~+22dBu |
Line input |
46mV (Max output) |
EQ |
LF |
80Hz ±15dB |
MF |
2.5KHz ±15dB |
HF |
12KHz ±15dB |
Stereo Input |
Channels |
2 |
Aux input |
2V unbaianced |
Tape input |
2V (Max output) |
Line input |
2V (Max output) |
Frequency response |
20Hz~20KHz (±2dBu) |
Gain renge |
-45dBu ~+22dBu |
Disortion(THD & N) |
0.01% at 4dbu, 1KHz |
EQ |
LF |
80Hz ±15dB |
MF |
2.5KHz ±15dB |
HF |
12KHz ±15dB |
| Max input |
Max output |
+22dBu balanced on XLR |
MON output |
+22dBu |
Tape input |
+14dBu |
Signal noise ratio(S/N) |
-66dB A-B(0dBu in +22dB gain) |
| Power |
Signal noise ratio(S/N) |
80dB (0dBu in @ +22dB dain) |
N.W. (Kg) |
12.5 |
| Dimensions (mm) |
462mm×403mm×187mm |
| amplifier |
| Output Power (EIA 1KHz 1% THD) |
8Ω |
2×124W |
| 4Ω |
2×182W |
Frequency response |
20Hz~20KHz (±2dB) |
Input Sensitivity |
1.5V |
Signal noise ratio(S/N) |
>90dB |
Distortion (typilcal) |
≤0.1% |
Input Impedance (5Hz~1Hz) |
22KΩ |
Damping factor (5Hz~1Hz) |
>200 |
Slew Rate |
15V/us |
ChannelsCrosstalk |
L-R: 58dB R-L: 58dB |
Power supply |
AC115V/230V 50~60Hz |
|
|
|