|
|
|
Characteristic:
-
- The X234 is a Stereo 3-way, mono 4-way crossover; These high quality crossovers are designed to extract maximum sound quality from your multi-amped sound system at a price that working musicians can afford.
- Accurate state-variable,18dB/octave butterworth filters prevent peaks or dips in the output at crossover points,ensuring good driver protection by rolling off crossover frequencies rapidly.
- A two-pole, high-pass filter may be electronically inserted at 40 Hz using a switch on the front panal, and a varaiable low frequency summed output is available for mono subwoofer applications.
- The rear panel of the X234 is clearly labelled for Stereo and mono operation.
-


CAD Chart

PDF documents
|
|
| |
X234 |
Crossover type |
stereo 3-way,mono 4-way(X234).
|
| I/O Interface |
1/4”PHONE JACK(balanced/unbalanced) |
| THDTotal harmonic distotion THD |
less than 0.006% |
| Signal noise ratio(S/N) |
more than-90dB |
| Filter Type |
18 dB/octave butterworth state-variable filters |
| Crossover frequencies-Stereo |
low/mid:50Hz to 5KHz in two ranges,mid/high:750Hz to 7.5KHz |
| Mono:low/low-mid: |
50Hz to 5KHz in two ranges,low-mid/high-mid:750Hz to 7.5KHz,high-mid/high:2KHz to 20KHz |
| Input Impedance |
20Kohms(unbalanced),40Kohms(balanced) |
| Maximum input level |
+21dBu(参考:0.775Vrms) |
| OutputImpedance |
102Ω |
| Maximum output level |
+21dBu(参考:0.775Vrms) |
|